My dvd player plays vcd+svcd but not dvd I have used a lens cleaner but it still will not let me watch dvds on it. its a bush dvd2004. This as also happen on my friends panasonic dvd player.
My Samsung DVD V6500 will play cd's and dvd' very well then on the odd occasion wont play a dvd. It sounds as if it is heavy breathing, then the error on disc comes up. I have played cheap free dvd's , but some good quality expensive dvd's won't play. Any answers please???
victoria
February 2009
The answer may be as simple as cleaning your CD drive assembly assuming that this fault has just accured and used to play DVD's.
Use a small paint brush to brush away any dust that has accumalated, taking care not to scratch the laser eye.
Re-lubricate the SLED rails (the bars that the Laser Rides on) and the drive Cog's/Wheels with Zinc and Castor Oil Cream with a Q-tip/Cotton bud (Not too much).
Try a Dvd!
If no joy you can try adusting the laser Pot's (if you have access to a digital multimeter).
There are two Variable potentiometers on the bottom of the Laser, one for DVD and one for CD. (Hopefully for you they are labled).
Adjust the DVD pot to 2600 ohms or as near as you can get it.
Re-assemble and give the laser eye a clean, then try a dvd.
If still no joy, the DVD laser diode may have given up the Ghost and a new laser is needed (A repair for the Laser does not exist! - that you could do.)
Hope this helps and Good luck.
PSX-Quinn
October 2004
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dvd players.