Recent: Safely remove screen protector from a Macbook Air?

Mend > Plumbing

Mend Immersion Hot Water

how can i fix my immersion (hot water)?

one day i put new 13 amp fuse in my plug and the water heated. But then coming home from work the next day the water wasnt heated. So i checked the fuse by putting it in the kettle plug and it worked fine so i dont know what the problem is. Could there be a problem in the electrical supply or with the heating element.

matt brion
September 2008
check the stat doesn't need resetting.
if the stat ok then check the element by doing a ohms test.

hi-spec plumbing & heating (essex)
September 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Immersion Hot Water

Related Questions ...

Mend hot water house
3

Hot Water tap only dripping ?

I live in an all electic house with an immersion heater for our hot water. the hot water is running fine out ... [Read more]
Mend turn water cold
1

turn off hot water supply?

We want to install a new kitchen tap. Cold water can be turned off at stopcock no problem. We have indirect su... [Read more]
Mend hot water central heating immersion heater
4

Immersion heater water luke warm at best?

Hi, We have an old (1970/80's) heating sytem. We have a Concord boiler which feeds the radiators and central h... [Read more]
Mend tank fine pressure
1

fortic tank?

new direct fortic tank overflowing.balltap is fine.immersion heaters fine. hot water pressure poor. cold water... [Read more]
Mend plumbing immersion heater hot water
2

Drpping overflow?

I have an immersion heater with a smaller feeder tank just above it but all part of same unit. I think It is t... [Read more]
Mend hot tank radiators
1

Very little hot water from my immersion water tank?

I live in a house that only has electric, the radiators are not run from the immersion tank but the water is, ... [Read more]
Mend heating plumbing temperature
3

I think that I have an air lock at the bottom of my hot water system?

I have a potterton boiler, feeding the heating and hot water. The hot water is held in a vented cylinder and h... [Read more]
Mend heater water heat problem
1

how to fix immersion heater?

my hot water tank doesnt heat the water. is it the immersion heater the problem.
Mend possible copper hot water
3

Is it possible to repair a split in a copper hot water tank?

I have caused a 5mm long hairline split in tne copper hot water tank whilst replacing the immersion. is it pos... [Read more]
Mend immersion heater hot water plumbing
2

I have no water coming out of my hot water taps?

I changed the immersion heater, turned off the water in the loft ( held up the ball**** ) then turned on the t... [Read more]
Mend hot water cylinder
2

location of hot water cylinder?

Can a hot water cylinder be sited on a ground floor,but still supplies hot water to an upper floor bathroom.Us... [Read more]
Mend drain hot water tank
1

How to drain a hot water tank?

I am fitting a new immersion heater in my hot water tank but seem unable to drain the water correctly.Please c... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Plumbing ...