Can I fix my integrated Diplomat ADP8132 dishwasher?
It is about 6 years old and suddenly all 5 lights started flashing when we pressed start. We tried holding the buttons down for 10 seconds and switching off for 24 hours in an attempt to get it to reset itself but all to no avail. Anyone got any other bright ideas apart from calling out an (expensive) engineer?
hi my dishwasher is filling an emptying but half way through the wash keeps jumping to rinse cycle and bleeping till I open it any ideas please
marie
November 2013
Hi John, it looks as if the machine has gone into a self test programme.Please try the following.
Open the door turn on the power and press the p button 4 times quickly within 3 seconds.This should bring on the super wash light.Turn the power off and then on again.This should clear the memory.If the memory has a fault,you will have to replace the pcb and they are £116 plus vat and postage.
All the best.
Foxy
August 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.