you would have to take the motor off which you do from the back of the appliance. unfortunately you cant change the brushes on this seperately but you can get the end frame for the motor which contains the carbon brushes. once the motor is off then you can take it apart by the four screws but make sure you remeber what way the motor goes back together. the brushes will probably very short. if they are about 1cm in lengh or you can see the copper wire throught the end then you need to purchase the end frame. any problems you can email me on jdvdomestics@live.co.uk
jdv
August 2008
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.