instruction manual required ?

been driving me mad for weeks thanks Fang works a perfect

Clemie
August 2011

Many thanks Fang - worked perfectly

Steve
February 2011

Follow Fangs instructions, then when i set the digital time my watch is perfect again!, thanks very much!!

ce
October 2010

This is a perfect answer that does work, just make sure the digital time is correct before adjusting the hands (as described above)

ce
October 2010

i tryed to change battery on my world time accurist,the digital is all missedup and hand are not turning .any suggestions

allen
December 2009

Fangs instructions helped me, spot on thanks

domo
March 2009

Ive just had my battery changed and same problem...just perform the following or rtfm as they say....

The analogue hands are not precisely synchronised with
the digital time? Do the following:

1. Press the lower right button to move the mode indicator hand to CHR.

2. Pull the lower right button out one click. The hour, minute and UTC hands will retract towards the straight up 12 O’clock position. You will see UTC on the top half of the digital display.

3. Press the upper right button to advance the hands to the straight up 24-hour position. Use the lower left button to go in reverse.

4. Press the upper left button. You will see HR on the top half of the digital display. Press the upper right button to advance the hour and 24-hour hand clockwise until they both point straight up at the 24-hour position. Use the lower left button to move the hand anti-clockwise.

5. Press the upper left button. You will see MIN on the top half of the digital display. Press the upper right button to advance the minute hand clockwise or the lower left button to move anti-clockwise until it is pointing straight up at the 12 O’clock position.

6. Push the lower right button back in one click.
The watch malfunctions in some way and the above
procedures do not work.

Fang
August 2008