Dishwasher Kenwood KDW12ST3A which shows E1 error?
I have a dishwasher Kenwood KDW12ST3A which shows E1 error on any programm I tryied to run.
I tryied to find the manufacturer's site but in vane.
Can anyone help me with links to the manufacturer or to an user manual for the model.
Kenwood dishwasher KDW12ST3A E1 fault - I understand - is due to a drop in water inlet pressure. I was sweating that I might have to take the whole thing apart or change feeds etc..but I think the fault arose on this occasion due to people leaning against the dishwasher, when congregating in the kitchen, which in turn put pressure on the water pipes at the back of the machine...pulled the machine out an inch or two and now it seems to be working!!
Sounds a bit basic but the machine is quite deep and I don't think the inlets are protected particularly well.
Good luck!
Cheeky
July 2012
check inlet water solenoid, tap lightly, (make sure power is switched off) worked for me.
210
June 2009
fault E1 in manual states no inlet pressure. sometimes fault code shows if machine takes too long to fill. check for blockage in inlet pipe.
maurice
July 2008
water inlet not filling.check if the water outlet valve is opening and there is suffecient water pressure
mark Stringer
July 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.