details for fitting ford mondeo 98 rear bumper?

Not always necessary to use Torx driver - the right size ordinary s/driver can possibly work. Also not necessary to remove rear wheel arch liners. Remove lower outside screw (holding liner to bumper), carefully hold back the liner until top bumper retaining screw revealed - and remove.
Remove the other wheel arch retaining screws, and the top two screws (located along the top rail when tailgate/boot lid lifted) and bottom two screws and Bob's your fathers' brother!
Sometimes difficult/awkward when replacing bumper when the two outside guide pins have to be located - ideally a two person job.

Roger
September 2008

It`s fairly easy. You need a the correct size Torx socket . Remove rear inner splash panels and all the torx bolts. Make sure you have the right size cut out for the exhaust (Diesel is different to petrol).Reassemble is the reverse.

Len
May 2008