Recent: How to Fix Hitachi DZ-MV550A Error Code 2881 | Guide

Mend > Cars

Mend Ignition Engine Stall

Ignition idle module problem i think????????

have problems with my ignition Module i think??

When my car is turning over if i was to raise the revs high and let the engine tick over it tends to try and stall it also does the same when i come to a junction/stand still after driving the car for a while it does the same.

Can anybody help please.

Paul
July 2004
Try changing your ignition wires and spark plugs. Bad ignition wires will short out the ignition module. I know it just cost me $1100.00 for a new module.

Rod
December 2004
you can change the idling on the carb (if the car has a carb)
if its a later modle some vehicle are equipped with an air mas flow meter. This would be faulty if the car stalls and has lack of power

cupra R
July 2004

Automatic Answer

We may have found other answers which could help you.

Click here for Ignition Engine Stall

Related Questions ...

Mend bit longer ignition
1

Scorpio ultima 2.5td?

Hi everyone! My scorpio is acting up a bit. The glowplug light no longer comes up and when you turn the ignit... [Read more]
Mend hope help problems
2

Whats happening to my car?

Hi, i hope you can help. Below i have listed the problems I've had with my car or I'm having with the car. ... [Read more]
Mend ford diesel engine
1

How can I fix ford escort diesel non stopping engine?

ford escort diesel non stopping engine P reg. when ignition switch is turned off & dash lights go out, engine ... [Read more]
Mend misfire engine ignition
1

vectra b fuel?

vectra z1.8xe engine misfires on idle/wont take throttle sometimes it will suddenly rev up but still seems to... [Read more]
Mend vauxhall engine lights
5

Vauxhall Zafira 1.6 cuts out then Engine electronics comes on?

I was driving along and pulled up at some traffic lights in my 04 plated 1.6 Vauxhall Zafira. I then noticed t... [Read more]
Mend ignition engine stall
1

Ford focus about six years old?

E have a problem where the ignition key is removed and the engine keeps running and the only way to stop it is... [Read more]
Mend stuck normal drive
9

Ignition switch Citroen Saxo, Forte 1.1, 2000?

Switch is stuck in the normal drive position, cannot turn ignition off, or start car. Key is retained switch.... [Read more]
Mend ignition engine stall
1

My vectra 1.8 1996 is possessed, possibly ignition?

i can start my engine and drive fine but when the engine has warmed up i cant turn the engine off unless i sta... [Read more]
Mend rover diesel engine
2

Turn off Rover 218 diesel?

My K reg Rover 218 diesel doesn't stop when I turn the ignition off - everything else goes off and there's a c... [Read more]
Mend peugeot diesel turbo
1

when i switch the ignition off on my peugot 306 it keeps running?

when i switch the ignition off on my peugot 306 it keeps running,i have to stall it to stop the engine even wi... [Read more]
Mend ignition engine stall
2

I have problems with my ignition Module i think??

When my car is turning over if i was to raise the revs high and let the engine tick over it tends to try and s... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Cars ...