I've removed the drain pump and tested it with a separate 240Volt supply and the pump motor & impellor run smoothly.
Have no wiring diagrams so not aware how the pump supply is provided - straight from the timer or through some sort of switch/relay?
Any ideas?
Cheers
Grant, just got back from holiday and had a crack at it before reading your post. took the pump out, tested it with a 240supply and strangely enough it was fine. reassembled it and hey bingo its working. Can't think what the hell caused the pump to die in the first place.
Anyway, thanks for your advice.
Tony
Tony
August 2005
its stright from the timer m8 when its at the point where it sould pump out stick a test device for 240 volts on the pump wires should get a reading if not its a timer fault
grant
August 2005
Automatic Answer
We may have found other answers which could help you.