How to reset service light on 1998 renault clio 11 1.2?

engine off hold down both buttons at the end off stork. switch on still holding buttons down then switch off then press buttons ten times . new miliage will show ... it works for me

conrad
January 2009

If it's just the spanner is flashing on the dashboard then it's easy to reset, scroll through display using button on end of wiper stalk until you get to the remaining mileage and press and hold button until display flashes to new service mileage keep button held until the spanner stops flashing and let go of button, ign off and on to check, bingo!!

Welung666
July 2008

you can reset the SERV/MIL light by disconnecting battery negative for 20 seconds but you need to recode your radio, and if fault is still active it will come back on again

Chris
July 2008

Did you manage to get an answer michael.
I need to reset my service indicator also. There isn't a fault with any other part of the car, it's just that i let my service date pass a long while, and i then took it to a friend mechanic who charged a lot less than Renault would have. Renault wanted £400 whereas my friend charged £80. The service indicator needs resetting on my Clio 2003 model. Please let me know if someone has the answer. koolclub@lineone.net
Thanks.

Nick.
April 2008

it is the service light I need to reset after carrying out oil and filter change

michael
April 2008

Are you sure its the service light which means service like change oil and filter or its the service light which means you have a fault on one of the onboard computers,if there is another light on with the service light it is a computer fault or possable brake fluid fault you need to check and see.

mark
April 2008