how do i get e4 error off on my powerpoint idw12 dishwasher?

See this link http://www.askaboutmoney.com/showthread.php?t=26680

Rob
December 2010

disconnect it and pull it out.
tilt it over on its front (door towards floor)
water will flow out on the floor
when water all out problem will be stopped reason is a sensor gets stuck

scooner 087
May 2009

take off righthand side panel to the bottom is an airpressure switch. switch can be taken apart and cleaned look for water?possible cause a fault which is caused by filter water not pump out returning through air pipe.worked for me

steve gee
September 2008

The Powerpoint IDW12 is a piece of rubbish, and dangerous to boot. We bought one from PowerCity, have had multiple faults with it over two years and then discover that it has an internal wiring short which our independent qualified electrician says should never have been cleared for shipment by the company, or by the seller. Very nasty and cheap throw-it-together.

The error code, by the way, means you need to call the shop where you bought it and get the number to call out your local service engineer. He/she will know what it means and service or replace the faulty part. Do this or throw it away. But don't try to fix it yourself: you might be lucky like us and only have to suffer two years of what we thought was static electrical problems, etc. Or you might get a very nasty shock.

PB
May 2008