toilet flushing system?

toilet flush system keeps filling up overflowing in bowel after filling up then stops after a few minutes

r wilkinson
October 2013

toilet takes longer to fill

jas
August 2008

Try using a tilling joint compactor on the tap housing case. Turn it anti clockwise beneath the filling level indicator. This should release the pressure cap causing a build up of low pressure in the boiler housing manifold. Turn all the cold taps on except the spindle tap which needs to be turned 46 degrees clockwise this will cause an air release and then turn the microwave on for 2 minutes at 700 watt or 1 minute at 800 watt adjusting the flux membrane every 0.5 of a second.
Hope this works

: }
March 2008