4 hours ago: Windows 11, Dell 5450, JBL Bluetooth headphones?

Mend > Televisions

Mend Dry Joints Switch

How can i fix my television?

I need to fix my television and have been told that the 'DRY JOINTS NEED RE-SOLDERING'. What are these and where can they be found on the T.V. It's because the tv some times switches it self off and won't switch back on till it's moved or tapped on the bottom

Jason Carney
October 2003
VERY DANGEROUS!!! DON'T go in there with the brush with the set turned.
it may work ... it may just kill you too

maybe a pro might be able to work that way without killing him/herself, but it doesn't sound like you'd be well advised to do that.

Your choice in the end, but it's dangerous (IMO).

Phill
June 2004
YOU CAN FIX THIS BY TAKING A PAINTING BRUSH AND SWITCH THE TV ON THE N REMOVE THE COVER AND RUB THE CIRCUIT BOARDS WITH THE BRUSH , DO NOT PUSH HARD, WHEN YOU COME ACROSS A DRY JOINT THE TV SHOULD COME ON AS THE JOINTS MEET , THAT IS HOW TO FIND THEM , BE CAREFUL

NEIL G
May 2004
A dry joint is a solder joint that was either not correctly done at the beginning or has 'worn-out' perhaps say on the back of a moving part like a switch. Solder joints are everywhere inside a tv and it's very dangerous in there with very high voltages even when the box is off and disconnected from the mains.

Phil Dixon
November 2003

Related Questions ...

Mend boiler pcb ignition
1

Potterton Prima F won't light?

Hello I have a Potterton Pima F boiler that's been giving me problems (2 years ago I had the problem with dry ... [Read more]
Mend ignition pcb red light
1

Potterton Suprima 50 - Pilot won't light?

Lovely flashing red light after three or so attempts by the boiler to re-light the pilot. Reset just restarts ... [Read more]
Mend boiler heating vokera
1

VOKERA LINEA 28 HUNTS ON THEN OFF THEN ON ?

LINEA 28 FOLLOWING SWITCH ON [HEATING AND WATER] KEEPS CUTTING IN AND OUT ON AN APPROXIMATELY 10 SECONDS CYCL... [Read more]
Mend panasonic picture standby
1

Pansonic TX-28DK1L switches to Stanby automicatically ?

When I switch on TV, it switches to standby - can't view the picture. 2 weeks prior to this, it was happening ... [Read more]
Mend heating repair fault
2

How do I remove PCB board?

The 407677 pcb in my potterton profile 40 is faulty ( thanks to this site for finding answers to symptoms). I ... [Read more]
Mend hi itself intermittently
2

Hi all, my HitachI C28W430N-311 TURNS ITSELF OFF INTERMITTENTLY?

When the TV has been on for a certain amount of time it will switch off and on almost instantly(like it loses ... [Read more]
Mend boiler ignition relay
1

sime 80e ingition board [boiler control ]?

hi, I have a problem on my sime 80 e friendly boiler id number 0063as4782 cd number 8092955 ser number 3001... [Read more]
Mend washing machine PCB Hotpoint
1

How can I fix my Hotpoint wasing machine?

My Hotpoint WMTL80 top loader washing macine continuously rotates the programme control switch, but after repl... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Televisions ...