Brake lights stuck on on Citroen xsara picasso. How do i fix this?

Thank you for guidance to the foot brake light switch locatioh.
The switch unit needed to be pushed forward to depress the push button to stop the brake lights staying on all the time.
It took me less than ten minutes and saved 40 quid to pay the local garage

Navin
March 2015

after replacing switch and bulbs my brake lights not coming on

mark
October 2012

Thanks Matty P. This did the trick although it was a bit fiddly. Citreon dealers must employ very little people

SlamDuncDevon
June 2011

for me the rurn spring on the brake pedal was sloppy and the weight of the pedal "made" the sensor

tony b
January 2011

your brake light switch is open all the time, had this with my one. move switch back a bit and supper glue it in place. switch up under dash top of brake pedal. i used no nails on mine...

matty p
September 2010

Just solved this problem myself tonight. Mine is an 03 1.8 petrol, the switch that needs turning is just above the brake pedal behind a flimsy felt textured cover. Just pop a few of the plastic retainers until you can see the required plug( you`ll have to be on your knees by this time). Then unplug the plug, turn the switch clockwise so that when the brake pedal is in its released position, the little button on the end of the switch is being pressed by the brake pedal arm which should stop your lights from staying on.

anthony
December 2009

The switch has two wires and is clearly visible where the fusebox cover is removed. The connector is about 6mm square and has a cutout on one side, although you wont see this until you have removed the plug. I rotated the switch clockwise to allow the lights to go off.

Geoff
August 2009

the brake light will stay on if the brake light switch has become loose or missalighed. remove the fuse box cover, wiggle the brake pedel up and down and you will find the switch. with the help or an asistant watching the lights realign the switch, its a very simple job but it is hell on your knuckles!!!

Nick
June 2009

if you take off fuse box cover in front of you to the left is a switch with wires. switch is connected to brake pedal. pull out wires and turn switch clockwise twice. reconnect. done

picasso steve
May 2009

have put new brake light bulbs in but brake lights are still not working, someone told me to find the brake light switch behind the brake pedle but can not see it please help

hemma
November 2008

underneath the brake pedal is a 'push-in' switch, adjust the switch (anti-clockwise) to the desired location so the brake comes on goes off when the brake is released

Dave
April 2008

Had this problem and it was due to the pedal having a brake sensor that was loose, also made the car lose power when i accelerated sometimes. Was 2 HDI 03. All sorted now.

James
March 2008

The brake switch is connected to the pedal mechanism somewhere....its probably become disconnected. If you cant see the switch above the pedal it could be on the operating bar on the passenger side, a la Peugeot.

John
March 2008