I am trying to install a new walking belt on my Proform 725FP Treadmill. I removed two visible screws but the End Cap is still tightly in place. Are there hidden screws holding the Rear End Cap in place?
Hey Sue, No. No hidden Screws. Just a tight fit. I actually just took mine off because the actual end cap broke and now I need to find out where to buy a new end cap. The one thing you might want to do is to remove the bottom feet with a phillips head screw driver (they're tight) and then slide out the plastic sheild under the unit (be careful, mine was full of dust!) It might make pulling the end cap off, a little easier. I had to wiggle mine a bit. Good Luck!
Ted
March 2008
Look on the under side of the end cap.
There may be 3 or 4 more there.
I hope your mechanical.
Get back if you need more help
www.mindbites.com/person/214-Mark
howtomendit.com for free repair help, information and advice.
