LG washing machine WM-1171FHB?

No brushes in motor- induction type! The Hall Effect Sensor is at fault however check 5 cable harness and contactions to power board, if OK buy replacement sensor.It's attached at the rear of motor.

Lucky Gold
March 2008

Hi carol
Its an indication of a motor or motor drive circuit fault.
Check out the carbon brushes in the motor. Theyre graphite blocks which transfer mains power to the copper segments of the motor - located at the other end of the motor from the drive pulley. Theyre probably worn down. They're quite cheap parts and easy to replace - the holders are plastic or bakelite and are generally held in with screws or plastic clips. Also, look at the copper segments they run on to check for burning or pitting. If the segments are burnt or damaged you need a replacement motor or a replacement armature (motor part) if you can source one. Occasionally may be a fault in the motor drive circuit board - in which case replacement of board only real option.
Check out my site for info: www.2ndwave.co.uk/manual.html

dan
March 2008