can u drill start a midi moto and how ?

how do i remove my flywheel from under to pull start caseing?

Daryl
January 2013

Yes you can use a drill. Undo the four allan key skrews around the pull start and take all off it off including the spacers. You should see a nut dead in the middle of where you just took off the pull start. Find a drill bit to fit it and hey presto just drill. That will spin the flywheel and thus creating the spark to ignite the petrol..

Dont listen to Angela she dont know what shes on about. I mean a wire??! how will you put a knot big enough for the centre of the pull start ey?!?Fair play to Si

Mitch
March 2009

yes u can start a miny moto with a drill iv done it .just take of pull start and der is like a big pin put the drill on tite and start drilln

si
March 2008

No ..you need to buy a new pull start. A metal one which will not break only costs a tenner on ebay. The only way to start the mini moto is to spin the flywheel. You can try with a piece of wire but to be honest for the cost of a tenner it's best to buy a new one.

Angela.
March 2008