hotpoint CTD OO?

i have the same problem and disconnecting the element ie from the white block connector made it run again.Many thanx Peter Jackson.

Gary McCutcheon
December 2009

Hi sounds like your dryer element has gone to find out take the right side panel off & disconect the white block conector if it does not trip then you have found the problem if not then it could be your motor.

Peter Jackson
April 2008

Disconnect from mains supply and remove rear cover, there may be splash marks from the fan at the bottom up to the heating element, if so the water being thrown up is tripping it out. Water is not being taken up to the drawer so check that the pipe isn't blocked and that the pump works.

BFT
March 2008