Recently, had the timing fixed on babylock. My daughter knocked the timing off again. This seems to be a reoccurring theme with this model. Would like to fix it myself or I will have to consider getting a different brand. Repairs are adding up!!
Hi,
Could you please send me the full instructions for fixing the timing problem on my BabyLock? I just got it out of the shop and it's out of whack again.
Thanks very much!
Terri
terri lesko
January 2013
timing order on sewing machine can acquired in releasing mechanical link under shuttle bobbins assembly if theres belt or gears connected driving your shuttle and bobbins assembly loosen allen screw and release belt or gear holding shuttle and bobbins shafting,reset position on needle foot assembly and shuttle hook assembly w/ bobbins in low dead center of needle hooking shuttle hook and bobbins assembly no motion when putting back gear or belt on shafting holding shuttle and bobbins tight allen screw,then manually rotate handwheel no power source only by your hand check if needle and shuttle assembly is free to rotate while the timing between shuttle hook and needle are working together try w/ thread on needle and bobbins manually only.if the upper thread hook the lower thread.regards
louis
March 2009
Hello Janet,
Timing problem is a major thing for all machines for some reason, has been for years, if you e-mail me I will attach full instructions to retime.
drivewithken@blueyonder.co.uk
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix sewing machines.