replacing lcd nokia 6500 slide?

what type are the 4 screws that need to be removed - mine look as though they are circular??

Rodg
November 2010

yes

qasim
October 2010

Went back together easier than taking apart!
Replaced earpiece, the only tricky bit is getting the plugs back in the sockets, easier if you slide it open!
I re-assembled in reverse order, don't know what is meant by putting buttons last as you need to put the two screws back which are covered by the buttons!
Like it was said do not force anything, use a credit card or something similar to pop open!
Although I am a mechanichal/electrical engineer, should be possible for anybody though with a bit of care!

MITCH
September 2010

mga inutil

pussy
August 2010

my nokia 6500 screen got destroyed..wat is cost for its replacement with a real screen and not the duplicate one?

jasmine
July 2010

job done !!! was actually quite easy ...just dont force anything ..... take back off take out battery undo the 4 screws ,then pry the slide off and undo the 2 straps .once u have it in 2 peices,undo the 2 screws at thetop while slide is up split the key pad apart take out the numbers its like a 1mm leave the back in then slide the phone shut and u will see2 more screws undo them and pry apart undo the sprap to the vidieo call camera and the screen strap change the screen over and dont forget to clean the glass while ur their because u will probaly never be their again... put the number keys in last ... peice of piss

andrew maiolo
May 2010

They're nearly impossible to re-assemble, and the last 4 screws are a NIGHTMARE!

Can't shift mine - phone in bits, all my data is LOST!!!

Don't do it.

Darren Philips
April 2010

dont fix it urself, go to a technician...

akyzshia
April 2010

Hi I have replaced my screen now screen blank any ideas?

carl
July 2009

l.c.d blek noai slide porblem

naseerwahidi
June 2009

get info off 6500 thats screen has broken

colin
March 2009

dont do yorself

jakeos
December 2008

Daryl, your a life saver with that shortcut, cheers mate.

Ian

Ian Leighton
July 2008

unscrew four screws inside batt cover prize apart slide from batt side unclasp the ribbon plugs now you have the phone in two parts unscrew screws inside slide at top you need to unclip the key pad from bottom of keys this is trickier it splits approx 1 mm under the pad prise from bottom up now at the top of where the key pad was there is two screws if you slide the slide up you will see them the rest is pretty easy ps when you put it back together key pad last

james hampton
April 2008

try this bud

http://www.formymobile.co.uk/6500slidedisassembly.php

Daryl
April 2008