Mend Vauxhall Vectra Cars

Find out how to mend it for free.

Ask Question

Mend repair fix Vauxhall Vectra cars

Related Categories

Mend > Cars

My Vauxhall Vectra speedo & rev counter have died?

Hi can anyone help?, i have a 1998 1.8 16v vauxhall vectra, my problem is that my speedo and rev counter have stopped working, sometimes the speedo needle vibrates alittle but thats about it, has anyone had the same problem?, is there a quick fix?.

Simon Bull
January 2008

Vauxhall Vectra Vehicles, Cars Speedo Rev Help

the speedo sensor is attached to the front nearside suspension leg. change this( ten mins work) it should cure it. you might have to reset codes with a reader as well to clear the codes.. ok..

howardfarmer58
November 2014

Aint got an answer, but why do most people say "Oh I have the same problem would like to know how to fix it" Thats no help to anyone at all (same as my input).

Rich
April 2014

my w plate has the problem of the speedo not working but evrything else is fine.any suggestins

wayne
August 2010

my s reg vectra 2.0 also has done the same i just had a cam sensor switch changed but that didnt fix the problem the mechanic at the garage said he had not got a clue why it was doing it, i will check the output from the alternator next i think.

shane
May 2010

get a new car because you ploblems are about to get worse

john davis
February 2010

I have a 2003 model vectra and both the rev counter and speedo have stopped working ! help

Darrin
November 2009

s reg vauxhall vectra speedo and rev counter works one day then when i swtch engine off and start the car again no clocks
the millage is working

madfifer
May 2008

Found the cause of my problem, my alternator was over charging and damaged the circuitboard behind the speedo.
Had my alternator repaired and got a second hand set of speedo clocks.
All is now well

simon
February 2008

I have exactly the same problem on my 2000 (Wreg) Vectra so will be very interested in any answers

Alastair Macdougall
February 2008

take the counters out the dash and check the connections in the back my mate had the same problem and it was as a bit tricky getting at the dials.

matt
February 2008