Recent: Fix food processor motor?

Mend Samsung Washing Machines

Mend Household Appliances, Washing Machines
Find out how to mend it for free.

Ask Question
Mend Household Appliances, Washing Machines
Mend repair fix Samsung washing machines

Mend > Washing Machines

Mend Samsung Washing Machine

Samsung washing machine?

Well same old problem, wont spin when there is a load in there comes up with error code e4 unbalanced load, every time without fail.
Checked brushes they seem ok, checked for blockages they seem ok. Belt seems fine.
Will spin on empty though?

alex
January 2008
hi got a Samsung smart wash 6kg and problem is that drum stopped turning and don't spin.the drive belt is still ok but makes a dull clinking nice when it tries to spin,any ideas.paul

paul james
May 2013
my error code indicates that the door is open yet its tightly closed so machine does not work

eunice
December 2010
This happened to my three week old Samsung washer. I sorted it by stopping the wash and adding a towel to balance the load. The washer seems to be excessively sensitive to imbalances in the load. I assume this is because it's not built to take a half load and so won't spin one garment or too heavy a load.

cfairc
September 2010
wont spin or drain out makes a loud noise also. we have a top loading machine also

Mel
August 2010
my washer gives E4 even when empty.
Any ideas or suggestions?

Sam
July 2010
My Samsung washing machine is 2 years old, and has started making a very loud vibration noise, it also pours out water from the bottom of the machine any idea guys?

andymc
January 2010
my front loader wont work on the last cycle, wont spin to empty the water out. The time stops at 8 minutes to go

russ
December 2009
How do you put the seal and wire back on the washing machine. Is the seal inverted and does the wire go underneath the seal?

jen
October 2009
My front load washer by smasung makes a noise while spinning

steve
August 2009
might be a problem with the suspension/dampers allowing too much drum movement. Dampers are hydraulic/air or friction type devices mounted onthe bottom of the drum to alleviate vertical oscillations. Could be worn, worn out or if friction sliders in need of lubrication. check out www.2ndwave.co.uk/manual.html;

dan
January 2008
Thanks I know thats what it means, but its doing that every time without fail, when it clearly isnt the case, lol!

The problem is that it wont spin! Have checked, brushes, belt, trapped items.

The motor is fine, and if i manually turn it it can spin a bit.

Thanks for your help

alex
January 2008
E4-Unbalanced load - Rearranged load - Remove/rearrange clothing

tony
January 2008

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Samsung Washing Machine

Mend Household Appliances, Washing Machines
Mend repair fix Samsung washing machines

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Household Appliances, Washing Machines
Mend repair fix Samsung washing machines