Hi, if your radio is anything like mine, a 5000 RDS. All the info your need is on the r.h side and it will require removing the unit in order to read it. You can get the little tool/s required to remove the unit, from any car spares shop. It amounts to two U shaped pieces of wire, which you push into the the holes either side. These then pull the clips in and allow you to pull the unit forward, If it will not slide forward try pushing the tools outwards from each side whilst they are fully engaged . I think you may be able to read the info once you have pulled it forward, so will not have to disconnect it. Good luck
mondsron
January 2008