managed to get the casing of around steering wheel, disconected the wire going to switch but the switch wont budge, cant see any grub screws or anything any ideas
I did this then my key snapped into the ignition ive been forced to use a screwdriver in my barrel and now that's worn away its sat on my drive for two days while my children have to get the bus in the snow because I can't get someone out to it til Monday I feel like joing wires together but would probably electrocute myself !!! One very frustrated mum :((((
Ann Wilson
February 2013
take care when re-fitting barrel, you will have to align it with locking mechanism [it should slide in quite easy!]
k
December 2007
hi to remove the switch you have to remove the ignition barrel first, turn the key to position 1 then theres a small hole in the top under the wiper switch, put a small screw driver in it and pull the barrel out, then on the ignition switch you have to squeeze the sides and slide it off
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.