Prima PDW012/S Dishwasher?

my machine wont do anything now cant even move the temp setting

darren snow
May 2009

i have had the same fault with mine, the dishwasher runs for 20-30 seconds then beeps non stop. I removed the temperature sensor (NTC). under the door the is an access plate remove this it can be a bit of a fiddle, under the bowl the sensor has two blue wires twist and pull to remove the sensor ( dont forget to turn eleccy off first) i dipped mine in boiling water for 5 mins and replaced it and mine has worked fine since but im sure it must be on its way out i think they cost £40ish

eccybob
June 2008

Hi Peter, sorry I can not help you but I am having similar problems with my machine. I turn it on and it makes a few funny noises for a while then it sounds like it is filling with water.the first light is on at this stage. after a few minutes the wash and rinse lights come on and flash and beep for a while, then they stay on and the machine does bugger all after that. I have tried opening it and there is no trace of water that has been pumped in. Just thought I'd let you know in case you were lucky enough to work out the problem. Likewise I'll let you know if I discover anything,cheers.

Malcolm Smedley
May 2008