Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
how can I fix my cabstar engine?Nissan Cabstar 2011 35.13 s/c MWB
engine starts ok but black smoke emissions and struggles to go up hill...Click here for the fix.
Nissan cabstar?I have oil in my diesel motor was running lovely and then started to hold back until it eventually cut out I changed fuel tank filter and cleaned lines put new stuff on run lovely for about 20 miles has done same thing please help...Click here for how to mend it.
not raving over 2500 revs loads of smoke??hi i am working on a x reg nissan cabstar 2.7 mechanical injection, we have replaced the turbo, had the injectors reconditioned and fitted a new exhaust, it is still running really poorly and will not rev over 2500 revs 3000 if i am lucky, it is fine on idle?? a lot of people are saying remove the b...Click here for the repair.
nissan cabstar headlights?2001 nissan cabstar. How do I change the headlight bulb?...Click here for the repair.
My Nissan Cabstar breaks down when the fuel tank reads one third full.?After a recent service my Nissan cabstar breaks down when the fuel tank gets down to one third full. The truck is an 08 and has done 17000miles. It can easily be restarted by squashing the priming pump a few times. It will then run for several miles. This will keep hapening until the tank is filled ...Click here for the fix.
Nissan cabstar e90 51plate cutting out, lack of revs?Hi guys,
My cabstar struggles to start, but once started its fine. Drives perfect and Ben all of a sudden will cut out. Pull over give it a sec and will run again but low revs for a while. I've had the alternator done and a fuel filter. Doesn't smoke to much. Any ideas????...Click here for the fix.
How do i overhaul my Nissan Cabstar 20 Starter. It has a Qd32 engine?The starter does not turn. It has burnt out....Click here for the repair.
Starting problems on my Nissan cabstar?Keep Turing the engine over but won't start plumes of white smoke...Click here for how to mend it.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE