Hi again Rupert, apologies for asking another question, could you recommend a place to put the Temp probe from my Inkbird? ie what part of fridge to fix it to give an average reading? ie back of unit? Side? On shelf? Thanks again Andrew
Andrew December 2019
Mid height on one of the sides would be the best location..
Thanks again for replying Rupert, ?Your method was my first preference but concerned over how I can “exit” the wires from the cabinet? As the original stat wires are “tightly” concealed and run through insulation toward compressor, I’m also at a loss how to install Inkbird temp probe? Should I carefully drill cabinet and gl...Click here for how to mend it.
Hi Rupert thanks for replying, model is Essentials (Curry’s own) CUC50W?The original stat is a capillary type, I did not want to disturb this and instead do my connections from compressor end? I could send a pic of the wiring diagram if you have an email address? My controller is an Inkbird ITC-1000F which is identical to yours in the YouTube video, should I use “pigg...Click here for how to mend it.
F/F thermostat conversion?I have bought a new under counter fridge freezer which I want to convert to a digital thermostat, I have a new Inkbird digital controller but confused over the wiring? Should I literally disconnect the original thermostat from compressor? And replace with inkbird sensor cable? Then power the inkbird...Click here for how to mend it.
Freezer keeps beeping ?My Hotpoint Future frost free freezer keeps beeping long after a pwer outage of 9 hours. It’s working perfectly but beeping foe last 20 hours...Click here for how to mend it.
Ice build up in freezer?We are experiencing quite a build up of ice under the bottom drawer of out indesit fridge freezer, we clear it but it comes back. What could be cuasing it?...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.