I've had the ERR F5 message so following what others have suggested, I played with moving the tach sensor back and forth a little at a time. I actually had it going for about 3 minutes and then it would stop again. Several more trial and errors later and I'm stumped. The last couple of times where it went about 3 minutes, it would actually speed up slightly (on it's own) and then quit. Not much but noticeable.
where can I get a sensor for roger black rower?the sensor on the seat slide has stopped working .where can I get a replacement...Click here for how to mend it.
Plastic wheel broken?The plastic wheel that sits in front of the sensor is broken. I called treadmill doctor and they say the part is no longer available. Do you know any where I can purchase this part?...Click here for the repair.
trimline err 05?my trimline just stops mid way with err 05 then if I unplug and restart its fine again for about 15 mins then does it again
Any answers for this problem...Click here for the fix.
Calibrating Sears Freespirit Mod.# 122 300811?Replaced blown 15A fuse in lower control board. Treadmill ran for short while then quit. Display reads CAL with E3 error. What is the procedure for calibrating this treadmill. Thanks....Click here for the repair.
What does this Error code mean? E03?I have a Carl Lewis Treadmill showing an error code E03. It turns on, but when I press the start button, it counts down as normal then there is a click and the E03 code comes up. I don't have a user's manual so no idea what this means...does anyone know?...Click here for how to mend it.
Tradlleadmill keeps stopping?When I enter distance, speed and time in my Spprtscraft TX4.9 or starts out fine for about 15 seconds then it completely stops and...Click here for the fix.
Why douse my irun start at top speed and won't slow down ?When I switched on my irun tread mill it started at full speed and won't slow down?...Click here for the fix.
Gym/fitness equipment?Avanti Power Runner Treadmill will elevate but will not run.
The LCD screen works and the power light is on but the speed up and down buttons do not work....Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.