Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
I have a gearbox problem with my Km300. I have taken the gearbox out but cannot remove the plastic/nylon sprocket (which was is driven via a belt from the motor). Without removing this I cannot access the screws to dismantle the gearbox.
kenwood chef km200 mixer?how do I remove the motor to fix the broken pulley spigot. I cannot find a way to separate the top half of machine...Click here for the fix.
Are parts available?Kenwood Chef mixer A702. Mixer quit. Where can I get parts and a parts list for this mixer?
Also need repair manual. Is the manual the same as a 701?...Click here for how to mend it.
How to remove the planet hub cover?I need to replace the planet hub on my Kenwood chef KM200, but need to know which way it unscrews. Is it anti clockwise? Are there any instruction videos?...Click here for the repair.
Need to be change speed dial on Kenwood chef KM010 major ?Full step by step guide...Click here for the fix.
Kenwood Chef Mixer?How/where can I dispose of my unwanted Kenwood Chef Mixer Model 701A? It belonged to my mother-in-law and I have never used it although, so far as I know, it is still working OK...Click here for the fix.
How can I fix slow speed on Kenwood a701a?I recently replaced the 450 ohm resistor on kenwood chef a701a. the motor is now running but only on no load, that is when I remove the liquidizer cover. It is running on slow speed and the speed control is not workin when I try to increase the speed....Click here for how to mend it.
How to replace brushes on Kenwood Chef A901?How does one open up the Kenwood Chef A901 so that one can replace the brushes?...Click here for the repair.
450 ohm resistor on Kenwood chef A701A?I am suspecting that the 450 ohm resistor is faulty. It is giving open circuit.
I found a replacement on ebay but i feel it is expensive. It is wire wound 15w resistor.
My question is can I put a "450 Ohm 5% 50 Watt Aluminum Shell Wire Wound Resistor" instead. It is way cheaper and being 50 watt s...Click here for the fix.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE