i have a old JCB 3CX 1985 and i have a problem with the back hoe sitting in the cab facing the back the back hoe will move from right to left but not left to right it will move out and back,I have replaced the Piston ring seals on both Slew pots thinking this is the problem but it is still not Fixed i have also disconnected the feeds to each pot to make sure i have fluid to both when moving the levers this was OK plenty presser to each pot
do hope you can help
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.