Hello there I've put a new roof outside my house and I've had to move the flu as it would have been inside the area. I took the end cap of the flu and some condensation came out I then got some round aluminium pipe and stuck it on the end put it above the roof and put the end cap back on and now the boiler will not work. Is this because of what I've done or is there a problem? Any help would be good. Thank you.
Ian July 2016
Yes it is because of what you've done.
You do not mention the make and model of your boiler
isotwin condens f 35 e service menu codes?Hello,
My gas boiler Saunier Duval ISOTWIN CONDENS F 35 E consumes too much gas. I ask for help in obtaining service instructions for this boiler. I am interested in a detailed description of all service menu codes "96" (1,2,3 ... 22) and "35" (23,24,25 ... 36).
Thank!...Click here for the fix.
error code e02 wont work when pressurised?Ariston Microgenus 28 - when pressure is 0 it works, when pressurised wont work! Have changed flow switch and pressure gauge - no luck...Click here for the fix.
Rdh10 & RCR10/443-GB by seimens?Had to replace destroyed rdh10 digital room thermostat. Cannot get it to pair to wired controller.
Checked all on line sources, but my RDH10 only has reset button, no learn or test button. How do I pair it?...Click here for the fix.
how often do we change the3032 battery in a digistat +2rf?do we have to change the small flat round battery(3032) in the thermostat...Click here for the fix.
Which way to turn slotted screw to adjust water pressure up on a glow worm ?Water pressure is at 0.7 on my boiler .had hot water but now boiler clicks and nothing else. Water still cold . Found the water inlet pipe with a slotted head but tried turning to the right (quite tight )turned to the left still no difference in pressure. HELP PLEASE...Click here for how to mend it.
How can I increase pressure in my Worcester boiler?I bleed a radiator today which seems to have reduced the pressure to zero. How can I increase the pressure?...Click here for the fix.
I have a 30cx glowwarm that is showing F4 as fault.I have no hot water.?I have a 30cx Glow worm boiler suddenly started to give cold water only. I don.t know how to fix it? I switched the mains off and on. The boiler starts and restarts but then the error
F4 comes up. Can you guide please?...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.