This is the "dog clutch". It unscrews anticlockwise. However, as it is connected to the gears in the box, you first need to immobilise the gears which is most easily done by clamping a screwdriver blade (or similar) in the mincer outlet. Alternatively, if you have already part disassembled the gearbox, jam the internal cogs with a screwdriver. Although it sounds daunting, the dog clutch undoes very easily and removal exposes the two additional bolts you need to get at.
Are parts available?Kenwood Chef mixer A702. Mixer quit. Where can I get parts and a parts list for this mixer?
Also need repair manual. Is the manual the same as a 701?...Click here for how to mend it.
How to remove the planet hub cover?I need to replace the planet hub on my Kenwood chef KM200, but need to know which way it unscrews. Is it anti clockwise? Are there any instruction videos?...Click here for the repair.
Kenwood Chef Mixer?How/where can I dispose of my unwanted Kenwood Chef Mixer Model 701A? It belonged to my mother-in-law and I have never used it although, so far as I know, it is still working OK...Click here for how to mend it.
control unit on my a701a kenwood m ixer?the control unit has come out and needs replacing - 1 )where can i get a replacement and 2) instructions to access and repair it...Click here for the repair.
I think I have killed my Kenwood!? Kenwood mixer 10 years old.?I decided to use my Kenwood - nearly 30 years old and wonderful for everything, to make bread dough. The poor thing decided that it didn't want to do this and started making horrid noises. Can I have it repaired....Click here for the repair.
Kenwood FP520 replacement motor has different wiring?Hi Folks,
my Kenwood FP520 motor burned out after the liquidiser bearing locked up >:-( .
I now have a replacement motor assembly, which is identical to the original EXCEPT that it has 6 wires running from it (2 groups of 3) instead of the 5 (2 + 3) of the old motor. Plus a couple of the wires a...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.