How can I raise the head on my mixer Kitchen aid ultra series?
How can raise the head on my mixer? the blades rub against the bottom of the bowl making my mixes or icing turn gray.
Natalie February 2006
When you tilt the head back, there is a shiny, straight-slot screw looking back up at you from the head/stand pivot area. This is where you would make the adjustment with a common (flat-blade) screwdriver. With motor OFF, you place a dime in the bottom of the bowl and turn the screw gradually one way or another 'till the beater attachment no longer makes contact with the dime. Once this clearance is obtained, remove dime and cautiously run motor at lowest speed and check to see that clearance is maintained between beater attachment and bowl.
Oil leaking into bowl.?Hello, My KM200 has always leaked oil into the bowl even from new. Kenwood told me that it is normal and they use food grade oil! I have bought the new grease/oil to replace but it didn't come with any instructions.
Please can anyone give me instructions?...Click here for how to mend it.
My NuWave party mixer will not work?Mine still doesn't work lined up 6 or 7 times with little spring & little petrussion on bottom of motor. Tonight was 1st time I opened. Was all set to mix my no boil no egg eggnog. Had to go buy a blender to finish. My grandaughter said hers works, so disappointed, tired of trying. NUWAVE isn't chea...Click here for the fix.
Are parts available?Kenwood Chef mixer A702. Mixer quit. Where can I get parts and a parts list for this mixer?
Also need repair manual. Is the manual the same as a 701?...Click here for how to mend it.
How to remove the planet hub cover?I need to replace the planet hub on my Kenwood chef KM200, but need to know which way it unscrews. Is it anti clockwise? Are there any instruction videos?...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.