Foot pedal problem with Frister and Rossman Cub 4?
Having worked perfectly for years, the foot pedal is now always delivering full power to the machine even when it is not depressed (checked with test screwdriver). Inside the pedal all looks OK. Any ideas what might be wrong please?
I have a cub 4 and the wiring in the pedal connector to the machine had come loose. Please can you tell me the order of the wires ie which colours go where.
Light on machine works when plugged in but not foot pedal.
Thanks for your help
EK
May 2020
It looks like I need to do this but can you explain why 'they are not needed these days'?
Raspberry
November 2019
Thank you so much drivewithken! Worked with my ancient machine
Sue
September 2019
Many thanks Ken. I had the same problem this morning and you solved it. The component to disconnect is the supressor capacitor.
RobJ
October 2017
hi , I had that problem too and solved it by splicing another make of foot pedal to the cable. Its very easy and works fine... I've now got another problem with my Cub 4 and need to know of a place where I can get spares for this old but lovely, efficient machine. Do you have any ideas? Thanks
linda
January 2009
Hello John,
The suppressor in the control has blown, it looks like a fuse, take it out and discard, they are not needed these days.
Ken
drivewithken@blueyonder.co.uk
January 2009
I can answer this question...
Foot pedal problem with Frister and Rossman Cub 4?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix sewing machines.