How to mend ... Drum Anything Back

speedfight 2 rear brake?

2000 model, drum brake . okay i have a 50cc speedfight and the pulley that turns a thing with splines to engag... [Read more]

proline TDV62...stopped spinning?

Our dryer stopped spinning but kept blowing hot air. My partner had a look and at the back and it looks like w... [Read more]

how to fit an electrolux door seal?

Hi, My daughters Electrolux Ew 1000I washing machine door seal has come off at the drum. Ive managed to put it... [Read more]

Hotpoint WMA50 won't final spin, and water stays in the drum?

I've had a luck at the pump, too see if there was a blockage, found a few coins in there. I put everything bac... [Read more]

how can i stop dryer tripping my cu rcd?

dryer(white knight c767) trips out the cu rcd when i turn dryer on.the motor/drum can be switched on only in c... [Read more]

How do I thread a new drive belt on Zanussi ZDE26100W?

I have obtained a replacement belt and taken off the back panel. I thought I could work out how to thread the ... [Read more]

Hoptpoint TDC62 Ultima thermostats keep going - ?

Lost heat so replaced the thermostats in the back. But the new ones seem to have gone already ( within 2 days)... [Read more]

How do I Remove drum from Hoover HDV 7 FM?

The bearing has collapsed at the back of the drum, there doesn't seem to be access from the rear of the tumble... [Read more]

zanussi f1045w?

i have stripped the drum down and removed spider shaft but am still unable to remove old bearings,the front be... [Read more]

Hoptpoint TDC62 Ultima thermostats keep going - ?

Lost heat so replaced the thermostats in the back. But the new ones seem to have gone already ( within 2 days)... [Read more]

Miele W844. Slight burning smell. Is it the belt? ?

I have a Miele W844, 8 years old. I had a strange smell, like a dentist's drill drilling, a friction type smel... [Read more]

Zanussi Nexus FL 1082?

I was washing some clothing in my machine a few hours ago (Zanussi Nexus FL 10 82) and towards the back end of... [Read more]

Hi can you help me, the main drum bearings have failed on my Indesit 1063w ?

The model of my indset is as above, I just wanted some advice on fitting the bearings on this machine as it se... [Read more]

AEG OKO LAVAMAT?

The machine was working perfectly untill the pumping out of the water came to a stop. I opened the pump remove... [Read more]

how do i remove the drum from the tub on hoover nhf 6127?

I am changing the rear tub assy (it developed a large hole). I got as far as removing the tub from the chassis... [Read more]

Bosch WVF 2402gb/01- drum plug?

there is 2 cm hole at the back of the drum and how to seal it?

Washing Machine overflowing?

We have an Aquaviva 1000 and noticed water coming out what looks to be the overflow pipe at the back of the ma... [Read more]

DRUM LIFTER ON A HOOVER VHD 814 WASHING MACHINE?

ONE OF THE LIFTERS ON MY HOOVER WASHING MACHINE HAS COME LOOSE IT HAS COME AWAY AT THE FRONT BUT STUCK AT THE ... [Read more]

drum on my washing machine?

the drum is banging back and fore very loudly

Hotpoint Washing Machine WMA36 Service manual needed please?

Hi folks, do any of you kind hearted people have a service manual or diagrams of how to replace the drum beari... [Read more]