Nissan Sunny LX radio / cassette needs to ne removed?

You should be able to remove the screws around the dash panel the radio is part of and carefully prise it away from the dashboard. The radio is held by two L shaped brackets behind the dash trim. Unscrew the radio from the two brackets and remove it from the dash. Push the panel back into place and put the screws holding it on back in. You'll need a PC2-13-4 wiring harness adaptor available from most car accessory shop to adapt the nissan plugs to ISO ones and may need an aerial adaptor. Push the JVC cage into the space left in the dash and secure it by turning over it's tabs with a screwdriver. Plug the ISO plug and aerial plug into the new radio and slide it into it's cage. Please note that the radio may not start up if the aerial is not plugged in as most nissans earth the radio through the aerial.

Tommy
March 2005