Installed a new video card in my Presario - no signal detected?

Also, try connecting your monitor to the motherboard video connection, loading the BIOS setup (DEL or F10 on boot for most Compaqs), and checking for a "boot initial video" option. Usually you can choose from "AGP" or "PCI". Try changing that.

QuantumBeep
June 2007

try reseating the card and checking any cables, if that is ok try updateing the firmware, you can download from www.hp.co.uk they tend to call the firmware rompaqs. The presarios did have a problem with the display where it wouldnt turn when the pc was turned on, there is a fix for that problem with a firmware update. you can probably get the a set of replacement disks from hp. If you woundering why i am refering you to hp, compaq was bought by hp about five years ago. Hope this helps

Dal
June 2007

Additional info - Presario 5000 - Model 5WV254. Came with MS Millenium installed, don't have the disks

Russ Reed
June 2007