Simpson eziset 750 only allowing spin cycle.?I have a simpson 750 eziset around 2008. When I turn it on it has the spin light flashing and the water temp light and water level lights arnt on. It allows me to start it but will only do a spin cycle. I have checked drain hose and it is clear. The dial for changing cycles doesnt do anything?...Click here for the fix.
Fault with Bosch Classixx 1200 Express machine?When programme selector is set, all the spin speed lights flash and you cannot select one and the start button will not light/start...Click here for the repair.
Configure Zanussi PCB?Hi
I have a Zanussi WJS-1265-W washer dryer and need to configure the PCB. I saw an excellent answer for a similar machine but it is not quite right for mine. Steps I believe are:
1. switch on with skip and start pressed
2. press fabrics 9 times to get to the error display
3. *** MISSING STEP NE...Click here for the fix.
what does error F:01 mean is wrong with my machine Hotpoint WMJLD943P UK?what is wrong with machine and can it be fixed easily Hotpoint washing machine WMJLD943P UK...Click here for the repair.
Zanussi FJ 1296 Washing Machine?drum does not turn in the wash or spin cycle. The water does enter the drum and is pumped out at the end but the drum does not turn. I suspected it might be the belt, but this is fine. Do I need a new motor?...Click here for the fix.
Reset Miele washing machine ?My Miele washing machine is in a tight spot. How can I reset it without having to pull it out and tilt it to drain the water which trips the automatic cutout? There must be a way to drain the water in the base other than tilting it......Click here for how to mend it.
How do you take the front panel off an AEG washer/dryer?Intergrated machine, have dropped the door back plate into the bottom of the machine and need to get the front panel off to retrieve it...Click here for the repair.
My washing machine won't turn on reliably?My Indesit WI10 has stopped functioning. If I leave it in the on position (no lights) it will start the cycle randomly after a couple of hours. Sometimes completing the cycle successfully. Alternatively if I hit the side of the machine the "on" light comes on, and sometimes stays on (the machine t...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.