Valliant Eco Tech 615 boiler ?since swapping a rad and bleeding boiler wont start in morning showing an F.15 code.( PCB board was replaced in June 2019 ) engineer at a loss and Valliant say replace PCB.( again) boiler is 9 years old and board are not cheap. can manage to restart boiler by switching power off/on a few times. ...Click here for how to mend it.
boiler analogue timer fuse change?Hi all, the analogue timer stopped working and I can see that there are 3 little wires at the back of it, one had come lose. Is there a way of putting this little thing back in some special way or do I need to get a new clock altogether and replace this?
J....Click here for the repair.
Baxi solo dry fire?The baxi solo dry fire alarm comes on after about a minute.
Pump working ok, no air in system, magnaclean filter cleaned. Boiler serviced recently when working normally,
Im lost to figure out whats the problem.
Is it a PCB card or a flow switch ????...Click here for the repair.
no water comes out of the hot water taps, cold water works ?No water comes out of any of the hot water taps, the cold water taps work, the central heating also works. the boiler is a Linea bolier. any idea of the problem and cost?...Click here for how to mend it.
Help with receiver please?My son accidentally pressed the button on my receiver that said 'do not press' on my boss therm receiver. Now I have no light on and if you try to reset it it just flashes on red, but doesnt come on. So nothing is working and its really cold. Any advice?...Click here for how to mend it.
Worcester Bosch 240 pilot light going out?Our LPG boiler suddenly stopped working. I can light the pilot light but it goes out as soon as I let the grey button out. Any suggestions?...Click here for how to mend it.
Home heating systems?I have a Glowworm 100f gas boiler system
It has a fault where the ignition stays on when the pilot light is lit. So the main burner won't come on.
I went through the Gloworm fault-finding list and it said if this happens to change the P.C.board. I had the P.C board checked and the company who did ...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.