I know very little about tractors, and even less about what you are asking us to help you with.
Am I correct in assuming that normally a tractor won't start if it's left in gear, and yours is faulty because it will?
This being the case, my guess is there will be a switch or sensor somewhere on the gearbox housing or the neutral zone on the gear selector that's wired to the ignition system. See if you can locate anything in these areas and look for a damaged cable that's grounding out and causing the issue. If all the wiring looks good you will probably have to withdraw the switch or sensor to test it and replace if necessary.
As I say, this reply is just a suggestion based on guesswork as I have no expert knowledge or experience, but would seem logical that it would be something liike that.
Good luck and let us know what the fix actually is for future reference.
F44 error code on NH 8560?Hi I have a new holland 8560 when I go into reverse or c range it goes into neutral and f44 flashes in a or b range. I have changed the petentionmeterrs and Calibrated but it's still the same. Mechanics in local dealer can't tell me what is wrong can anyone help please...Click here for how to mend it.
1956 fordson major torque specs?Like to know torque specs for head bolts, rocker arm, and valve cover with two bolts on top only...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.