Check tap is fully turned on. 4E means no water coming in. If tap open then turn it off and remove hose from back of machine, point end into bucket or sink & open tap again slowly to make sure water flows from tap. If ok, check filter in inlet valve where the hose connects. Look for blockage. If all okay then probably the inlet valve is not opening. You will need a multimeter to find out why.
Samsung te2 error code?What part do I need to repair my washing machine when it shows a te2 error code. Some say fan duct senor and others say water pressure switch. I'm confused. Help please...Click here for the repair.
washer showing E4?My Samsung VRT model wa4547000aw/a2 washer is leaking. Showing E4. Found small clear line on side of tank. Put it on. Will not finish load. Shows E4 within a few mins....Click here for the repair.
Brand new Samsung Ecobubble WF80F5E2W4X showing 5E error code on trial run?I have just installed aBrand new Samsung Ecobubble WF80F5E2W4X washing machine and tried to do the trial rinse and spin but it is showing the 5E error code and not draining. Does anyone know why this might be or experienced anything similar? Might the machine be faulty or have I not installed it pro...Click here for how to mend it.
Samsung p1253?Have fitted new pump but still have same fault 5e the pump does not spin what causes the pump to spin...Click here for the fix.
how to fix error 3E on DC9300316A,?I have the Samsung washing machine with the motor DC9300316A, it would not spine and it shows error 3E but it does not have the brusher or is there a brusher inside that I can not see,...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.