Hotpoint Aqualtis AQ9F 492I sticking on spin cycle?Machine goes through its program then gets to 1 minute on the delay timer and 800 rpm on the spin. When it stops it just starts up spinning again and keeps spinning, stopping and spinning over and over. The timer stays on 1 minute. Any ideas?...Click here for the repair.
Loose drum Hotpoint 800 Electronic 9506 Loose drum?Hi Hotpoint 800 Electronic 9506 my drum has come loose it moves freely in the machine in any direction but will still wash and spin although noisily can it be fixed or is a new drum assembly in order??...Click here for the fix.
My washing machine drum is loose. Hotpoint 800 delux 9526?The front side of the drum is loose, i know very little about washing machines but i'm convinced if its something like a rubber band i can fit it. I'm quite technical minded.
Does that sound right? I have taken the top off but it appears that i would have to remove all the bits of motor and suc...Click here for how to mend it.
Bits of Grey plastic in drum.Hotpoint 800.?I have a Hotpoint First edition 800 washing machine and recently I've been finding shreds of dark grey plastic inside the drum and in the washing.It also makes a loud knocking noise on a full spin but is fine when doing all other operations.When The drum is turned manualy it is fine and makes no noi...Click here for the repair.
how can I fix my hotpoint washing mchine 800 wm51?how do I replace brushes on the motor on hotpoint washing machine800 wm51...Click here for how to mend it.
How do I replace the power switch to my Hotpoint Aquarius 800 deluxe WM13?There appears to be a mechanical failure on the on/off switch of the above washing machine. The switch is near the top of the machine and two rear screws can be removed to lift part of the top lid, but I cannot find the front fixings. Is it easy to replace the switch once that has been done?...Click here for the repair.
how do i change the brushes in my hotpoint first edition 800 wm 51?i would like to know how to change and were to find the brushes in my wm,it is filling and emptying but the drum isnt moving its making the clicking noises as if its trying but with no success...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.