how to mend it - Fix appliances, electricals, gadgets, cars... Ask for free help
:: home
:: add a question
:: search
:: help
:: most recent
:: unanswered
   Search: Go 
Fixed for free!
Ask Your Question
Popular

These categories may also be of interest ...

Household Appliances, Sewing Machines

Household Appliances, Steam Cleaners

Household Appliances, Steam Irons

Household Appliances, Tumble Dryers

Household Appliances, Vacuum Cleaners

Full list

... mend, fix, or repair just about anything.

Help someone
  Are you good at fixing things?  

Click here to help

Fault info.
Click here for Thetford repair information.
First time?

howtomendit.com costs nothing to use and you can ask a question without an account or logging in.

Click here to ask a question.

Answers

Who answers the questions?

Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.

Search for a fix
How can I fix my
Stairlift?
Mend it
How can I mend my Sears dishwasher?
Categories > Mend Household Appliances, Stairlifts > Question
Q & As - mend, repair, fix household appliances, stairlifts, stair lifts, staircase, lifts, up stairs, down stairs, curved, rail, motorNavigate to ...
Household Appliances, Stairlifts (373 other questions)
Related questions - cutting, out, ok, down
Add a question



Mend > Stairlifts

Question - mend, repair, fix

Stannah 260 cutting out going up but ok down?

I have seen several questions on here re stairlifts only going up a few inches then cutting out. Ours was ok going up but not with any weight on it and fine coming down. As suggested on here, I have replaced the batteries but it still isn't working at all. I tested the batteries I took off and they are actually both at 13.5v (£35 wasted :-( ). The edge switches all seem free. I am wondering if the 'up' switch on the arm may be faulty but not sure how to get into this. Anyone any ideas? thanks



Gary B
April 2019


There is more help available. Mend - cutting, out, ok, down
Need to mend your Stannah 260 stairlift?

To add an answer, click here To add a new question, click here To find all other questions, click here

Answers - mend, repair, fix

Answers will appear here when the question above is answered.

(No answers have been added yet.)

Can you help? Click here to add an answer.

To add an answer, click here    

Add An Answer Form

Add your answer using the form below ...

The question: Stannah 260 cutting out going up but ok down?
Your answer:

(Add your answer here. Try to include as much detail as possible.)
Your name:

(Enter your name as you wish it to be displayed.)
Other questions in this category - Household Appliances, Stairlifts
Stannah 260 stopping after couple of metres ... help!?

My Stannah 260 was installed by Stannah through our local Council with Disabled Facilities Grant. This week it has begun halting after couple of metres .. if I turn off at arm, it will move a short way then stop again. What is wrong please? Stannah quote far too much for us to pay so I cannot use ...

Click here for the fix.
Stannah 260 stopped on stairs - no power?

Our 14 month old Stannah 260 is used about twice a week. Today it stopped suddenly halfway down the stairs two months after service. The mains, transformer and battery are working properly but there is no power to the PCB or beyond. Feel so let down as we bought it because of Stannah's good rep...

Click here for how to mend it.
stannah 260 stair lift will not go back up after stopping at the bottom?

hi when the chair lift reaches the bottom and stops it will not go back up unless i wind it back up a few inches then its fine. i have a stannah 260 siena chair lift....

Click here for the repair.
Stannah 260 will not go up but will go down?

My Mum has a Stannah 260 stair lift and it just stopped working. She came to the bottom of the stairs and it wont work. If I manually wind it up, the lift will go down. I have checked with a multimeter that there is plenty of voltage going to the connector on the PCB when the up button is pressed...

Click here for the repair.
my Stannah stairlift 260 has started to miss the charging points.?

My Stannah 260 stairlift does not find the charging points at the bottom, middle or top. I can move it slightly at the bottm to find the charging point to stop it beeping. What could be the problem?...

Click here for how to mend it.
How long does a Stannah 260 battery to recharge?

Stannah stairlift 260 not working . Amber and green light on but how long does battery take to recharge. Battery charger had been turned off for some months as chair no longer in use....

Click here for the fix.
How can I fix my Stannah 260 stairlift?

My Stannah 260 stairlift battery ran low because the contactor bracket was loose. Now one battery will not charge above 11.4 volts and the lift will not move with a person on it. It will move a short distance empty but stops and has to be manually returned to the charging station. Is the battery the...

Click here for the repair.
Stannah Model 260 No Green light seems dead but beeps of charging station?

Hi I have an issue with this chair lift, the green arm light does not light, batteries have been changed, and they are charged (checked with meter). If I manually move the chair off the charger it will sit and beep but not respond to the chair controls If I manually move the chair off the cha...

Click here for the repair.
Fix what?
Computers, Firewalls - fix/mend/repair/service information
Musical Instruments, Guitars - fix/mend/repair/service information
Security Systems, Home Alarm Systems - fix/mend/repair/service information
Help wanted!
Advertisements
Fixed!
Wow! I just saved myself £60 two weeks before Christmas.

Nina
Dec 2019


Mend it
How can I mend my Worcester Boiler?
All appliances!

To mend any household, kitchen, or other electrical appliance start here.

To search for repair advice click here.

To find out how to mend it click here.

Mend it
How can I fix my wireless mouse?
Fault find
Click here to fix Belkin products.
Advertisements
Important

Attempting repairs can be dangerous.
In many instances work should only be undertaken by a qualified professional.
Ensure you have read our Small Print page before using information supplied via this website.

©  2003 vE
We use Cookies. See our Privacy Policy.