Do you really need to ask the same question 4 times? Answer is yes a lot more dismantling is required. It is a major job and not usually tackled by a novice who doesn't know what they are doing. The bearings have to come out from the front after removing the inner spin bowl and shaft. That usually means removing the whole front panel on the machine if possible. Then separating the two halves of the outer drum. Some makes & models you can't remove the panel and the drum assembly has to be lifted out of the cabinet.
The code ef0 appears in my Aeg machine ,what shoul i to to mend it . Thank ?How should i mend the efo code in aeg machine? Thank you in advance...Click here for the fix.
aeg lavamat 72620?I have error code C9 motor issue displayed on the LED front screen. I can reset this ok using the sequence of pressing the buttons, but, after 5 minutes, the error reappears. I have replaced the motor and also brushes, but exactly the same issue appears. The motor spins for 2 seconds and then gently...Click here for how to mend it.
aeg lavamat turbo 16810 error code e90?aeg lavamat turbo 16810 washing machine has error code e90,what does this refer to and how do I repair fault...Click here for the repair.
It is showing C3 what does this mean.?I have an AEG Oko Lavamat 88730 Update washing machine. It is displaying the code C3, the alarm is sounding and the pump continues to function. Can you tell me if this is repairable and is it an expensive repair....Click here for how to mend it.
AEG 88840 update?Water leaking from drum input shaft down onto the base tripping the float switch and giving the fault code C3, how do I remove the pulley wheel that drives the drum it has a Allen screw in the centre is the thread clockwise or anticlockwise ( ie lefthand thread )...Click here for how to mend it.
How to I removel the front panel on a AEG 16830?I need to remove the front panel from my AEG washer/dryer as the little drain tube in the kick plate has come out too far & I now have water all over the floor. Does the panel unbolt from the top or do I have to lay the machine on its back?...Click here for the repair.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.