The poster said they can turn the dial on by hand and it then drains and spins. If pressure sensor was blocked it would over fill. Pump is not blocked as poster states. Poster did not come back to advise if he followed my suggestion in previous post i.e. check the drip dry switch is on normal. If it is not then machine will stop and not drain or do final spin. He may get a better result if he answered the first suggestion instead of starting a new post.
Lincoln Appliance NZ June 2018
could be the pipe from the bottom of drum up to the pressure switch is blocked, it tells the machine how full/empty the drum is of water. remove machine top cover to see it connected to the sensor switch somewhere behind the front panel at the top. Or blocked pump filter or load too heavy.
how do i fit a door gasget to a hotpoint WMA74 washing machine?I need to fit anew (non smelling )gasket to our Hotpoint washing machine it sits between the door glass and the drum. it looks quite a problem without taking most of the machine apart. Can I get please a HAPPY answer to this Question
With lots of hope Mike...Click here for the answer
Bosch 1400 classixx 6?I think I turned machine off just before it finished now shows a zero, flashing key, start button flashing and finish alarm beeping. when try a wash cycle goes to flashing 135 then all of above....Click here for the answer
why doesnt it fill up and wash. you cant wash a blanket in 2 inches of wate?why doesn't it fill with water and wash...Click here for the answer
where can i get parts for my Fisher Paykel washing machine?I need to purchase Tension rods for my Fisher Paykel washing machine?...Click here for the answer
How to fix Indesit pwc7143w?My machine is taking in water then stopping in wash cycle.the only cycle that works is drain. Help!...Click here for the answer
bosch exxcel7 washing machine?hi,
how did you know what bearing kit to buy..As ive not split the drum yet im unsure of the bearing kit to purchase..I have a bosch exxcel7 machine and nobody is able to give any info on this product! any ideas?
john...Click here for the answer
How to Fix Hoover elite 930?How to Fix Hoover elite 930
It isn’t draining and spinning to finish the wash cycle
Though I can reset the dial at place to drain and spin manually...Click here for the answer
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.