Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
My Kenwood KMX 50 Series speed control has stopped working - or only intermitently - any idea what the problem might be, and how to begin accessing the switch?
How to remove the planet hub cover?I need to replace the planet hub on my Kenwood chef KM200, but need to know which way it unscrews. Is it anti clockwise? Are there any instruction videos?...Click here for how to mend it.
Kenwood Chef Mixer?How/where can I dispose of my unwanted Kenwood Chef Mixer Model 701A? It belonged to my mother-in-law and I have never used it although, so far as I know, it is still working OK...Click here for how to mend it.
control unit on my a701a kenwood m ixer?the control unit has come out and needs replacing - 1 )where can i get a replacement and 2) instructions to access and repair it...Click here for the fix.
I think I have killed my Kenwood!? Kenwood mixer 10 years old.?I decided to use my Kenwood - nearly 30 years old and wonderful for everything, to make bread dough. The poor thing decided that it didn't want to do this and started making horrid noises. Can I have it repaired....Click here for the repair.
Kenwood FP520 replacement motor has different wiring?Hi Folks,
my Kenwood FP520 motor burned out after the liquidiser bearing locked up >:-( .
I now have a replacement motor assembly, which is identical to the original EXCEPT that it has 6 wires running from it (2 groups of 3) instead of the 5 (2 + 3) of the old motor. Plus a couple of the wires a...Click here for the repair.
How can I fix slow speed on Kenwood a701a?I recently replaced the 450 ohm resistor on kenwood chef a701a. the motor is now running but only on no load, that is when I remove the liquidizer cover. It is running on slow speed and the speed control is not workin when I try to increase the speed....Click here for the fix.
How to replace brushes on Kenwood Chef A901?How does one open up the Kenwood Chef A901 so that one can replace the brushes?...Click here for the fix.
450 ohm resistor on Kenwood chef A701A?I am suspecting that the 450 ohm resistor is faulty. It is giving open circuit.
I found a replacement on ebay but i feel it is expensive. It is wire wound 15w resistor.
My question is can I put a "450 Ohm 5% 50 Watt Aluminum Shell Wire Wound Resistor" instead. It is way cheaper and being 50 watt s...Click here for the repair.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE