How do you remove an electric bison classic stairlift with a powe platform?
I am going into a house that has an old Bison Bede Classic straight stairlifte. The lift is not working and there seems to be some sort of lowering platform the is coonected to an electric motor fixed to the top of the wall at the top of the stairs. There is 3 curve stairs at the top of the staircase. The rail which looks to be one long length rests on the ground floor and fixed to the wall at the top by a bracket. How do I remove this lift and rail? As it does not operate electrically does anyone know what I should be looking out for to get it going or does it have a manual winding mechanism somewhere? Any advice is appreciated.
Les January 2018
Answers will appear here when the question above is answered.(No answers have been added yet.)Can you help? Click here to add an answer.
Stannah 260 stopping after couple of metres ... help!?My Stannah 260 was installed by Stannah through our local Council with Disabled Facilities Grant. This week it has begun halting after couple of metres .. if I turn off at arm, it will move a short way then stop again. What is wrong please?
Stannah quote far too much for us to pay so I cannot use ...Click here for the answer
How to reset a Bison Classic stairlift. Installation fault flashing "E"?How to reset a Bison Classic stairlift. Installation fault flashing "E"...Click here for the answer
during going up the stairs the chair only travels at half speed?during going up the stairs the chair only travels at half speed why...Click here for the answer
Removing batteries on stannah 420 stairlift ?I have tried replacing a pair of batteries on a stannah 420 stairlift,I can remove the lower battery but not the top battery because the seat is too low down and I can’t remove the cover, any ideas of how to raise the seat?...Click here for the answer
Stannah 300?Im looking for a local engineer Cw12 Congleton to have a look and serivice a Stannah 300 does anyone have a phone number for one
Many thanks...Click here for the answer
where can I purchase Stanna 420, two carbon brush assembly?Where can I purchase Stanna 420, Carbon Brush Assembly in USA?...Click here for the answer
Stannah 400 Remote not working?I have replaced the batteries on the remote, but although the lights now work, the remote does not work. The other remote works fine. I believe I may have to reprogram the remote to get it to work. Can anyone advise me and what I should do?...Click here for the answer
Any Service people for Sterling Stair Lifts in CT?I have an older Sterling lift. It is stuck at the bottom of the stairs. Last time it seemed to be the hinge on the footrest as when I was moving it it went up. Now thats not working. Any idea who can service these? Thanks Thomas...Click here for the answer
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.