Put power on at wall switch but off on panel. Press & hold the water temperature up button and then press power on button. Machine will beep. Let both buttons go, then press the water up button once more. The light above it should be on at this stage for a 5kg machine. With that light on then press power off on panel, that will lock it in to memory. Error 9 just means it needs to know what size the machine is.
Fisher & Paykel GWL10US not agitating. ?Fisher & Paykel GWL10US is not agitating during wash or rinse. It spins very slowly and has a low whine sound. The mashine stops during wash and beeps. The hot and cold lights both blink and also the 4th light from the left of the of the washing cycle lights.
If I advance the cycle to the end it...Click here for the fix.
Locate & clean lint filter on Fisher & Paykel Smartdrive Excellence 6.4?How do I find and clean out the lint filter on a Fisher & Paykel Smartdrive 6.5 washing machine please?...Click here for the repair.
Fisher & Paykel Aquasmart fault 49?Hi, I followed the fix for fault 245 and found a paperclip had jammed the pump. I cleared the pump, reassembled and now have a fault 49. Any ideas?...Click here for the repair.
Fisher & Paykel IW812 - hot and cold water not filling?Hi,
When machine is turned on, can hear the hot and cold valves turning on momentarily allowing a trickle of water to enter the bowl then no water flows.
Can fill the machine manually thru all cycles and machine works fine.
Machine will not fill automatically when hoses are connected via t...Click here for the repair.
How can I repair my out of balance switch on my Fisher & Paykel?I have determined that my machine, Fisher & Paykel Ecosmart, has fault code #43, out of balance switch. I need to know how to access the switch....Click here for the repair.
Fisher & Paykel smart drive ?My fisher & paykel smart drive top loader won't drain it is stuck on the last spin cycle....Click here for the fix.
Fisher & Paykel GWL11US?My GWL 11 is showing code 49 and will not reset. I replaced the fill solenoids and the water blending tank that they are attached to. Solenoids check out at 64 ohms. Washer was running, but got out of balance. When I checked on it the pump was draining. I also pulled the pump to assure it was not ob...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.