Bekco dishwasher keep's on pump!?

I had a problem like this which reoccurred every time I refilled the salt tank. Someone suggested being extra careful when refilling as if even one grain of salt gets down and into the drainage area it can mess up the little switches. I solved the problem by filling with boiling water several times to dissolve the salt. Works fine now! I'll just be really careful when filling up the salt again next time!

Melp!
December 2016

It is probably the drain pump that is running. It will do that if water has leaked into the base tray & activated the flood switch. Pull dishwasher out from under bench. Tip it back as far as you can & see if water comes out (have some old towels ready) Once water is out it should come back to normal. If the same thing happens again you will need to find out where it is leaking from. It may not come back.

Lincoln Appliance NZ
November 2016