Hello..and thank you for answering my question...I have a very old Kenwood Chef model #A701A (circa 1960's) mixer...the bread hook, paddle and whisk attachments do not lock into place as I suspect they should...what am I missing? - Fred
Are parts available?Kenwood Chef mixer A702. Mixer quit. Where can I get parts and a parts list for this mixer?
Also need repair manual. Is the manual the same as a 701?...Click here for how to mend it.
How to remove the planet hub cover?I need to replace the planet hub on my Kenwood chef KM200, but need to know which way it unscrews. Is it anti clockwise? Are there any instruction videos?...Click here for the fix.
Kenwood Chef Mixer?How/where can I dispose of my unwanted Kenwood Chef Mixer Model 701A? It belonged to my mother-in-law and I have never used it although, so far as I know, it is still working OK...Click here for the repair.
How can I fix slow speed on Kenwood a701a?I recently replaced the 450 ohm resistor on kenwood chef a701a. the motor is now running but only on no load, that is when I remove the liquidizer cover. It is running on slow speed and the speed control is not workin when I try to increase the speed....Click here for the fix.
How to replace brushes on Kenwood Chef A901?How does one open up the Kenwood Chef A901 so that one can replace the brushes?...Click here for the fix.
450 ohm resistor on Kenwood chef A701A?I am suspecting that the 450 ohm resistor is faulty. It is giving open circuit.
I found a replacement on ebay but i feel it is expensive. It is wire wound 15w resistor.
My question is can I put a "450 Ohm 5% 50 Watt Aluminum Shell Wire Wound Resistor" instead. It is way cheaper and being 50 watt s...Click here for how to mend it.
im trying to fix a kenwood chef mixer a703c ,motor goes gearbox seems to wo?i have the kenwood a703c the dog clutch doesnt seem to wind right down on top of the large plastic gear ....Click here for how to mend it.
kenwood chef A701 kitchen mixer?Motor runs OK speed control works OK, until the motor is put under increased load and it cannot cope, checked motor brushes and they are good and long. Any idea please...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.